Wrist Chronicles

How to change battery in pulsar wrist watch

Learn step-by-step instructions to change the battery in your Pulsar wrist watch. Keep your timepiece running smoothly with this easy guide.

Use a small, flat tool, such as a screwdriver or a plastic pry tool, to gently open the back casing of your timepiece. Position the tool in the gap between the case and the back cover, applying minimal pressure to avoid damaging the casing.

Once the back is removed, take note of the power cell model, usually found etched on the cell itself. It’s crucial to replace the old one with an identical model to ensure compatibility. Use tweezers to carefully extract the depleted power cell from its compartment.

Before inserting the new cell, ensure the contacts are clean. Place the new power source in the designated slot, ensuring it sits securely. Once in place, reattach the back cover by aligning it properly and pressing gently until it clicks into position.

Must-Have
Pulsar APS 3 Rechargeable Battery Pack
Amazon.com
Pulsar APS 3 Rechargeable Battery Pack
Top Rated
Professional Watch Case Opener Kit
Amazon.com
Professional Watch Case Opener Kit

Finally, check the functionality of your timepiece. If it isn’t working, double-check the placement of the new power cell and that the back casing is firmly in place.

Instructions for Replacing the Power Source in a Pulsar Timepiece

Utilize a case opener tool to gently pry open the back cover of the timepiece. Position the tool in the small notch located on the back. Rotate it carefully to avoid damaging the exterior.

After removing the back, identify the old energy cell. Observe the orientation and model number, which can be crucial for selecting a suitable replacement. Note any clips or holders that secure the energy cell in place.

Use tweezers to delicately lift the old unit out of the compartment. Handle the component with care to prevent short-circuiting or physical damage. Ensure you are grounded to prevent static electricity buildup, which can harm internal mechanisms.


Must-Have
Pulsar APS 3 Rechargeable Battery Pack
Long-lasting power for night vision devices
The Pulsar APS3 Battery Pack is designed for thermal and digital night vision device users, providing up to 8 hours of power. Its quick recharge time of 3.5 hours ensures minimal downtime for your adventures.
Updated: 17 hours ago

Insert the new energy unit by placing it in the same orientation as the original. Ensure it fits snugly into the designated area. If applicable, reattach any clips that secure the power source.

Realign the back cover and press it firmly into place. Listen for a click to confirm it is sealed properly. If needed, use the case opener tool again to ensure a tight fit.

Finally, set the time accurately. Observe the functionality of the timepiece to ensure everything operates correctly. If any issues arise, revisit the installation to confirm proper connection and position of the new element.

Gather Necessary Tools for Battery Replacement

Ensure you have a small, flat-head screwdriver to open the case back securely. A pair of tweezers can help you handle small components without causing damage. Additionally, a soft cloth will protect the surface of the timepiece during the procedure.

Additional Items

Have a new power source on hand, specifically designed for your model. A magnifying glass might prove useful for examining tiny parts. Lastly, a case holder will stabilize the item while you work.

Open the Watch Case Without Damage

Use a case opener designed specifically for your model to avoid scratches or cracks. Employing a soft cloth under the opener can provide additional protection for the exterior.

Steps to Safely Access the Interior

  1. Identify the case back type, whether it’s screw-down or snap-fit.
  2. For a screw-down back, rotate counterclockwise gently. Apply firm but controlled pressure.
  3. If it’s snap-fit, insert a thin blade carefully into the small notch around the edge. Pry gently to release the latch.

Additional Precautions

  • Ensure the workspace is clean and free of debris.
  • Working over a soft surface can prevent damage if the timepiece slips from your hands.
  • Consider using magnifying tools for better visibility of intricate details while opening.

Remove the Old Battery Safely

Use a non-metallic tool to gently lift the old energy cell from its compartment. Ensure no pressure is applied that could damage surrounding components. Position the tool under the edge of the cell, and carefully pry upwards.


Top Rated
Professional Watch Case Opener Kit
Versatile tool with adjustable holder and dies
This professional watch case opener kit includes 6 adjustable dies and is built for durability, perfect for efficient watch repairs without damaging your timepieces. Ideal for both hobbyists and professionals alike.

Always wear safety glasses when performing this task to protect your eyes from any potential debris. Avoid touching the new unit with your fingers, as oils can affect performance; instead, use tweezers or gloves.

Dispose of the Old Cell Properly

Place the discharged power source in a container designated for recycling. Many retail locations offer recycling programs specifically for electronic waste. This not only protects the environment but also complies with local regulations regarding hazardous materials.

Inspect the Compartment

Before placing a new energy source, examine the compartment for any dirt or corrosion. A clean surface ensures optimal performance for the new cell. Use a soft brush or cloth to gently remove any debris present.

Install the New Cell Correctly

Ensure the new cell corresponds precisely with the required specifications. Check the type and size, which are crucial for proper fitment and functionality. Place the new unit in the designated slot with the positive (+) side facing up, unless specified otherwise.

Alignment and Contact Points

Make sure the contact points of the new unit align perfectly with the connectors on the circuit board. Gently press down until the unit is seated securely. Avoid applying excessive force, as this may damage the components.

Cell Type Positive Side Orientation
CR2016 Upward
SR626SW Upward
LR44 Upward

Testing Functionality

After installation, gently close the case and test functionality. Observe the timekeeping accuracy and any additional features to confirm everything operates as intended. If issues arise, recheck the placement and alignment of the new unit.

Seal the Watch Case and Verify Functionality

Ensure the case is aligned properly before sealing. Press down gently to secure the back cover in place. If screws were removed, reinsert them using the appropriate screwdriver and tighten them gradually to avoid damage.

After sealing, check for any gaps which may indicate an improper fit. Inspect the seals for any visible signs of wear or misalignment. A well-sealed case prevents moisture and dust ingress, preserving the internal components.

Next, conduct a functionality test. If the timekeeping mechanism operates correctly, the task is complete. Allow the piece to run for a short period to confirm accuracy. If discrepancies occur, ensure the new power source is seated firmly, as improper placement can lead to malfunctions.

Finally, if applicable, reset any features like alarms or timers, and review the settings to ensure they function as intended. This step verifies that all systems are working post-replacement.

Ethan Cole
Ethan Cole

Ethan Cole is a watch enthusiast and lifestyle writer based in New York. With over a decade of experience exploring the world of horology, he brings expert insights into timepieces that blend craftsmanship, innovation, and personal style. When he’s not reviewing the latest releases, Ethan enjoys vintage watch hunting and photographing timeless moments.

Wrist Chronicles
Logo