Wrist Chronicles

How to remove wrist watch dial

Learn the step-by-step process of safely removing a wristwatch dial. Gain insights into the necessary tools and techniques for this watch repair task.

To detach the front face of a timepiece, ensure you have the right tools: a case opener, plastic prying tool, and tweezers. Carefully assess the model, as some may have screws or clips securing the face. For those with screws, utilize a screwdriver to loosen them before proceeding.

When preparing to lift the face, gently apply the plastic tool between the case and the glass, taking care to avoid damaging any internal components. Progress slowly, as sudden force can lead to cracks or scratches. Once you’ve loosened the connection, you can delicately lift the face away from the casing.

Top Rated
Professional Watch Case Opener Tool Set
Amazon.com
Professional Watch Case Opener Tool Set
Hot Pick
10-Piece Watch Screwdriver Set with Extra Blades
Amazon.com
10-Piece Watch Screwdriver Set with Extra Blades
Must-Have
Bergeon 7814 Watchmaker Repair Starter Kit
Amazon.com
Bergeon 7814 Watchmaker Repair Starter Kit

After successful extraction, analyse any gaskets or seals that might require replacement. Properly cleaning the area before reassembly ensures longevity and operation of the piece. Prioritizing precision during this process is key to maintaining the integrity of your timepiece.

Removing the Face of a Timepiece

Utilize a case knife or a small, flat tool to gently pry the face from the base. Insert the tool in the gap between the edge of the case and the edge of the face. Work around the perimeter, applying even pressure to avoid damage.

Preparation Steps

Before starting, ensure the timepiece is face down on a soft surface to prevent scratches. Remove any screws or retaining clips securing the face if applicable. Consult the manual for specific instructions related to the model.

Final Steps

Once loosened, carefully lift the face straight up. Be mindful of any attached components such as hands or movement parts that may need detaching first. Examine for any adhesive residue that might require cleaning for future reassembly.

Tip: If resistance is met while lifting, reassess if all fasteners are removed, as extra pressure can cause damage.


Top Rated
Professional Watch Case Opener Tool Set
Effortlessly opens screw-down watch cases
This professional bench watch case opener ensures secure removal of screws without damaging luxury timepieces. Its adjustable holder and robust dies allow for efficient battery and seal replacements on various watch sizes.
Updated: July 14, 2026 3:24 am

Gather Necessary Tools for Dial Removal

Ensure you have the following tools at hand:

  • Case opener: A specialized tool for accessing the back of the timepiece.
  • Dial protector: A thin plastic or rubber film to safeguard the surface during handling.
  • Tweezers: Use fine-point tweezers for precision in lifting components.
  • Screwdrivers: A set that includes various sizes for removing screws securely.
  • Pliers: Non-marring or plastic-tipped pliers to avoid scratching parts.
  • Plastic lever: Ideal for gently prying off the face without causing damage.

Additional Recommendations

Check for a magnifying glass to improve visibility when working on small components. A bright work surface light can also enhance your ability to see details. Finally, a soft cloth can help prevent scratches on the timepiece’s case while you work.

Identify the Types of Watch Cases

Determine the material of the case, which can range from stainless steel, titanium, brass, to plastic. Stainless steel is favored for durability, while titanium offers a lightweight alternative. Brass may provide an antique look, and plastic is often found in sport-oriented models.

Examine the case shape; common options include round, square, and rectangular. Round cases are classic, while square and rectangular cases typically add a modern touch to the design.

Consider the case size, usually measured in millimeters. Popular sizes for men are between 38mm and 42mm, whereas women’s timepieces typically range from 26mm to 36mm. Ensure the size matches personal style and wrist dimensions.

Identify the case back types, such as solid, exhibition, or screw-down. Solid backs are common, while exhibition backs allow glimpses of the movement. Screw-down backs enhance water resistance, making them suitable for aquatic activities.

Note the presence of additional features like rotating bezels, which can aid in tracking elapsed time. Some models also showcase complications integrated into the case design, adding functional artistry.


Hot Pick
10-Piece Watch Screwdriver Set with Extra Blades
Ideal for watch and jewelry repairs
This versatile screwdriver set features multiple sizes for precision work on watches, eyeglasses, and jewelry. Each tool is designed for easy use, perfect for both professionals and hobbyists, ensuring long-lasting durability.
Updated: July 14, 2026 3:24 am

Carefully Open the Watch Case

Use a case opener tool or blade to gently unfasten the back of the timepiece. Position the tool in the small notch designed for this purpose. Apply minimal pressure to avoid damaging the exterior.

Types of Opening Methods

  • Screw-Down Case: Rotate counterclockwise to loosen the back. Ensure you match the correct tool to the screw size.
  • Snap-Back Case: Insert a blade into the gap and twist cautiously. Listen for a click indicating that the cover has released.
  • Sealed Case: Requires careful heating or specialized tools to break the adhesive seal without causing damage.

Ensure Safety Precautions

  • Work in a clean, well-lit area to avoid losing components.
  • Wear gloves to prevent fingerprints on the internal mechanism.
  • Have a soft cloth handy to protect the surface of the timepiece.

Once the case is opened, proceed with caution to maintain the integrity of all inner parts. Keep track of all screws or components removed during the process for easy reassembly.

Disconnect Dial from Movement

Carefully approach the disconnection of the face from the internal mechanism to prevent damage. Utilize a pair of plastic tweezers to gently lift the edge of the circumference without applying excessive force. If any adhesives are present, specifically designed solvent should be applied around the interface. Allow it to seep for a few moments to weaken the bond.

Observe the positioning of the hour, minute, and second hands; it’s advisable to remove these components beforehand if they obstruct your access. Use a hand removal tool to press down gently on the hands, lifting them away from the center post. Do this methodically, ensuring minimal alteration to the movement beneath.

Tools Required Purpose
Plastic Tweezers Lift the circumferential edge without scratching
Solvent Weaken adhesive connections if necessary
Hand Removal Tool Remove hands in a gentle manner to avoid damage

After removing the hands, inspect the connection points of the face. Many models utilize small screws or clips; utilize a precision screwdriver to unscrew these parts. Maintain careful attention as losing any small components can complicate reassembly.

Once these securing elements are detached, slowly lift the face away from the movement. Keep awareness of any remaining connections, such as wires or additional components, that may still anchor the face.

Remove Dial Without Damage

Utilize a case opening tool to gently pry the bezel without applying excessive force. This prevents distortion or scratching on the case. Once the bezel is lifted, employ a pair of fine tweezers for increased precision.

When detaching the face, ensure to handle it by the edges to avoid fingerprints on the surface. If screws are present, use a micro screwdriver to loosen them, maintaining even pressure to prevent slippage.

To safely detach the face from the movement, locate any clips or tabs securing it and use a plastic pry tool to disengage these components. Avoid metal tools to minimize the risk of scratching the movement or damaging delicate parts.


Must-Have
Bergeon 7814 Watchmaker Repair Starter Kit
Complete set of 18 essential tools
The Bergeon 7814 kit is designed for watchmakers, containing essential tools to tackle various repair tasks. This comprehensive set helps beginners start their watch-repair journey with quality tools.

Be aware of any dial feet that may be soldered to the movement; applying heat sparingly can assist in releasing them without breakage. Use a magnifying glass to inspect for any hidden connections, maintaining focus on minimizing potential damage.

Throughout the process, maintain a clean workspace to avoid contamination. Utilize a soft cloth beneath all parts to cushion against unintentional impacts.

Reassemble the Timepiece After Dial Detachment

Align the movement carefully within the case to ensure proper seating. Verify that all components are in their designated positions without any obstructions.

Install the Dial

Position the face accurately over the movement, ensuring that all mounting points are aligned correctly. Use the appropriate tools to secure it, applying gentle pressure to avoid any damage.

Reconnect the Hands

Begin by attaching the hour hand, ensuring it’s placed directly over the 12 o’clock marker. Follow up with the minute hand, verifying its alignment before securing. Finally, add the second hand, if applicable, ensuring smooth movement.

After reassembling, perform a status check on the functionality. Wind the mechanism if necessary, and test the accuracy of the timekeeping. Clean the exterior to restore the original luster, completing the reassembly process.

FAQ:

What tools do I need to remove a wristwatch dial?

To remove a wristwatch dial, you typically need a few specialized tools. These include a case back opener, screwdriver set (usually with small, precision screwdrivers), and sometimes a pair of tweezers. If the dial is secured with adhesive, you might also need a heat source, like a heat gun or hair dryer, to soften the adhesive. Ensure you work in a well-lit area and have a clean workspace to avoid losing small components during the process.

What are the steps involved in removing the dial from a wristwatch?

Removing the dial from a wristwatch involves a careful set of steps to prevent damage to the watch. First, ensure the watch is clean and dry. Use a case back opener to gently remove the case back. Once the case back is off, locate the screws or clips holding the movement in place and carefully remove them. Next, lift the movement out of the case. Be cautious, as some movements may have a dial that is glued in place. If that’s the case, applying gentle heat can help loosen it. Once the movement is removed, you can access the dial. If it’s screwed in, unscrew the dial feet carefully using a tiny screwdriver or tweezers. Finally, lift the dial off gently, ensuring not to damage any connecting wires or components. Always proceed slowly and carefully to avoid harming the delicate parts of the watch.

Ethan Cole
Ethan Cole

Ethan Cole is a watch enthusiast and lifestyle writer based in New York. With over a decade of experience exploring the world of horology, he brings expert insights into timepieces that blend craftsmanship, innovation, and personal style. When he’s not reviewing the latest releases, Ethan enjoys vintage watch hunting and photographing timeless moments.

Wrist Chronicles
Logo